Brave VH9934 Especificaciones descargar pdf (Pagina 21)

Towing

1. Position the hitch on log splitter over or

onto the tow vehicle’s tow ball. In some

cases the hitch may not totally engage

with the ball without raising the front leg of

the log splitter.

2. Raise the front leg to the towing position

by pulling the spring pin. If not already

secure, make sure the hitch on the log

splitter is properly and securely attached

to the ball.

3. Attach the towing safety chains to the tow

vehicle.

815-672-8861 19 Brave Products, Inc.

If you find you must hold the log

until the wedge touches it and

holds it in place, be very careful

not to put your hand on top of the log. If

you must, hold the log in the middle of the

block. Remove your hand immediately

when the wedge engages the log. Never

use your hip or any extension device to

operate the valve control handle.

e. Only using your hand, push the control

lever down (towards the log). If the log

moves before it is contacted by the

splitting wedge release the control

lever and then reposition the log.

Operate the log splitter only when

standing in the area shown in the pic-

ture.

f. Hold the control lever, extending the

splitting wedge, until the log is split or

the cylinder rod stops at its maximum

travel position. As the log is being split,

DO NOT reach forward and attempt to

catch the split wood — let it fall to the

ground.

CAUTION

Brave Products, Inc. 26 815-672-8861

1 2 ... 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios